|
|
|
LC -type vertical screw conveyor
|
1 , Features and Applications |
LC -type vertical screw conveyor , vertical circular shell in the use of high speed centrifugal force caused by spirochetes , with the friction material and the shell , to overcome the material and between the spiral surface |
Friction , and the materials caused by dead along the spiral to contribute to the decline , the delivery of the material up to enhance mechanical . Simple structure, small footprint . |
LC -type vertical screw conveyor for vertical transport bulk density 0.5t/m3 <ρ ≤ 1.3t/m3, non- sticky powder dry granular materials, such as grain , cement, carbon black , chemicals , etc. |
. |
LC -type vertical feed screw conveyor feed to maintain the necessary pressure to force feeding method should be used . |
LC -type vertical conveyor screw conveyor does not apply to highly mobile , perishable , Viscous , easy caking and corrosive materials , such as fly ash , wet sand . |
|
|
II Specifications |
Specification |
LC160 |
LC200 |
LC250 |
LC315 |
Screw diameter (mm) |
160 |
200 |
250 |
315 |
Spirochete speed r / min |
450 |
450 |
415 |
380 |
Rated throughput m3 / h |
10 |
28.5 |
51 |
95 |
Conveyor height m |
2.5 ~ 15 |
2.5 ~ 15 |
2.5 ~ 15 |
2.5 ~ 15 |
Electric motor |
Height m |
2.5 ~ 5.5 |
2.5 ~ 5.5 |
2.5 ~ 4 |
2.5 ~ 4 |
Model |
Y100L2-4 |
Y100L2-4 |
Y132M1-6 |
Y160M-6 |
Power |
3KW |
3KW |
4KW |
7.5KW |
Height m |
6 ~ 7 |
6 ~ 7 |
4.5 ~ 5.6 |
4.5 ~ 6 |
Model |
Y112M-4 |
Y112M-4 |
Y132M2-6 |
Y160L-6 |
Power |
4KW |
4KW |
5.5KW |
11KW |
Height m |
7.5 ~ 10 |
7.5 ~ 10 |
6 ~ 7.5 |
6.5 ~ 8 |
Model |
Y132S-4 |
Y132S-4 |
Y160L-6 |
Y160L-6 |
Power |
5.5KW |
5.5KW |
7.5KW |
15KW |
Height m |
10.5 ~ 13.5 |
10.5 ~ 13.5 |
8 ~ 11 |
8.5 ~ 12 |
Model |
Y132S-4 |
Y132M-4 |
Y160L-6 |
Y180L-6 |
Power |
7.5KW |
7.5KW |
11KW |
11KW2 Taiwan |
Height m |
14 ~ 15 |
14 ~ 15 |
11.5 ~ 15 |
12.5 ~ 15 |
Model |
Y160M-4 |
Y160M-4 |
Y180L-6 |
Y180L-6 |
Power |
11KW |
11KW |
15KW |
15KW2 Taiwan |
|
Note : n- speed , r / min ( 10% deviation allowed range ); Q- throughput , m3 / h; table Q value of the fill factor of 0.33 | |
|
|